STAAAHHP!! High Gain Distortion Guitar Pedal

Knobs and footswitch descriptions:

VOLUME: Controls the output volume

DIRT: Controls the amount of distortion

MASS: Controls the amount of low end. Turn clockwise for more and counterclockwise for less.

BITE: Controls the amount of high end. Turn clockwise for more and counterclockwise for less.

RAGE: Controls the feedback oscillations. This knob has no effect unless the RAGE footswitch is activated.

NOTE: The RAGE version of this pedal uses a feedback loop to create the oscillation effect. This means that it sends the output signal from the pedal back into its input. It matters where you place it in your signal chain. For best results, have it as the first pedal in your chain or only place it after true bypass pedals that are turned off. Also, it can work best with passive pickups (although we've had great success with some guitars with active pickups). If you have active pickups and are not getting the feedback results you would like, try a guitar with passive pickups.

This pedal has true bypass switching, and requires a 9 volt DC power supply with a 2.1mm negative center barrel (not included). DO NOT FEED THIS PEDAL MORE THAN 9 VOLTS.

Current draw: 17 mA

*The company and product names used on our listings are for identification purposes only. We are not affiliated nor endorsed in any way by Boss. All copyrights are retained by their respective owners.